www.cynergy3.com ? 2017 cynergy3 components, all rights reserved. specifications are subject to change without prior notice. cynergy3 components and the cynergy3 components logo are trademarks of cynergy3 components limited. iso 9001 certified cynergy3 components ltd. 7 cobham road ferndown industrial estate wimborne, dorset 21 7 bh pe SC4002ALM-6 2017 telephone +44 (0) 1202 897969 email:sales@cynergy3.com made in the uk SC4002ALM-6 universal input dual setpoint trip amplifier wide range of user configurable inputs isolated re-transmission isolated input stage and isolated transmitter supply configurable trip action and fail-safe mode led display of input, setpoints and configuration the SC4002ALM-6 trip-amplifier can accept a wide range of inputs including 4- 20ma, thermocouple, rtd and voltage types. the unit can have up to two relay outputs and each can operate as a high or low trip. the unit also produces an isolated high level output. the relay outputs are single pole change- over relays with mains voltage rating. each trip can be configured so that the alarm condition can be above or below the setpoint. the relays can be energised or de- energised in the alarm condition, satisfying fail-safe and non-fail safe applications. in addition the alarm led's can be selected to light when the relay is either on or off. the input stage is isolated from the output and power supply and the inputs can be user-reconfigured for several different ranges if specified at point of order. in addition there is an optional isolated transmitter supply of 24vdc, suitable for exciting most standard transmitters. in addition numerous functions can be selected using the built-in menus including latching functions, delay on or delay off and an alarm delay on power up. if you require any other special function please contact us on the number below. the power supply is a wide ranging 16- 30vdc supply inputs dc current and voltage 0-20ma, 4-20ma, 0-10ma into 15 / 30 ? 0-1v, 0-10v, 1-5v into 100k / 1m ? min and max full scale ranges: dc current 0 to 1ma 0 to 5a dc voltage 0 to 100mv 0 to 300v note: for input voltages greater than 60vdc a divider unit must be specified. thermocouples types e,j,k,n,r,s,t & b linearised or non-linearised ranges wide range of inputs auto cold junction compensation. upscale or downscale t/c burnout options. resistance thermometers 2, 3 or 4 wire pt100 or pt1000, linearised (or not) ranges wide range of inputs (up or downscale b/o) outputs mains rated relays 3a resistive at 240v ac dc current and voltage 0-20ma, 4-20ma, 0-10ma into 750 0-1v, 0-10v, 1-5v into a minimum 2k technical specifications parameter min typ max comments supply voltage 16v 24v 30v supply current (ma) 24 110 24vdc supply, max if both relays energised volt drop (ma input) 3v at 20ma input on 0-20ma range input impedance (volt) 1m input impedance (ma) 15 temp coefficient 100ppm/oc relay response time 10ms operating ambient 0oc 55oc relative humidity 0% 90% isolation voltage 1kv see note surge voltage 2.5kv for 50s transient of 10kv/s notes setpoints are configured on the led display on the front panel. h/h,h/l, l/h, ll, fail-safe, non-fail safe and hysteresis options are set using the display. figures based on 24vdc supply @ 20oc ambient installation data mounting din rail ts35 orientation any connections screw clamp with pressure plate conductor size 0.5-4.0mm insulation stripping 12mm weight approx 140g ordering information part no.: SC4002ALM-6 term. connection 3 5 4 6 10 output -ve 18 relay 1 n/c 12 output +ve 19 relay 1 n/o 20 relay 1 common 1 power input ?ve 15 relay 2 n/c 2 power input +ve 16 relay 2 n/o 17 relay 2 common tx supply +ve, rtd 4 th wire input ma, v, t/c, rtd +ve input ma, v, t/c, rtd -ve rtd 3 rd wire
|
